Getecha: Full program at Lake Constance

Aschaffenburg (R) - To demonstrate the effect of the energy is safe, middle class Getecha two-hopper mills RS series from 2404 with 7.5 kW motors. These generators are designed for continuous operation for crushing mills are made of injection-production waste or Blasformaschinen used.  

One of the two RS 2404 will be equipped with Energy-safe. According to the company statement, he optimizes the energy efficiency of AC induction motors, which operate under cyclic loading (partial load) and reduces the power consumption of the drives by up to 30%.Abrasives


Continues to show the machine builders a mill hopper RS ​​3806 Variation with rotor, which can be transformed by-pass elements of an open to a closed design, and feed mill RS 3809-S. A special feature of this machine is a self-adjusting clip control, which adjusts the feed rate of the mill permanently on the timing of an extrusion or thermoforming line. This speed automatic does not only hold the sheeting tight, but also make the set-point adjustment with the production machine and manual need adjusting, so Getecha.

In addition to the hopper and feed mills for relatively high hourly outputs at the stand even more compact granulators for smaller flow rates (up to 35 kg / h) are shown. This will include a special model of the GRS 180, the ground thanks to a special anti-wear action even abrasive material with more than 30% glass fiber. The mill has not only wear plates and wear strips in the hopper below the rotor blades, but also has rotor and stator blades with carbide inserts. In addition, licker and are hardened steel plate, and the sieve of the mill is designed to be wear-protected. The GRS 180, and also issued the granulator RS 1615 are suitable for use in industrial and laboratory applications.

The second focus is the automation Fakuma. Designed for fast, reliable removal of sprues in injection molding, for example, has issued the GLS 1-S. This side-entry device is part of a flexible modular linear motion, can be used to implement each requirement to complete positioning and handling systems with up to four axles and a load capacity of up to 150 kg economically. 

 The products are suitable extraction systems for about 2K machines. Specially designed for the gate and small parts to tap small and medium-injection molding is the GL 3-S - a lightweight with three servo axes, freelance programming and simple operation. Standard processes can be parameterized so that with minimal training. See also in Friedrichshafen will be several innovative sprue pickers, such as the GRA 112 (g capacity 500) for molding machines up to 3,000 kN, or the sleek and affordable Getpick with electrical interface Euromap 12/67 (load 250 g). Also on board is also stable for Getgrip gates with up to 1,000 g. This universal gripper has a large hub can rotate left or right and is also comfortable to use.